Spray
Wets the stain before the fabric gets agitated, so the pass starts with contact instead of dry friction.
Carpet Spot Cleaner OEM Supply
Choose the Right Spot Cleaner Mode for Sofas, Mattresses, and Car Interiors
A carpet spot cleaner manufacturer built around a 3-in-1 spray, scrubbing, and suction flow, and a portable carpet cleaner supplier option for buyers comparing cleaner reach, tank split, and output mode.
1200W + 500W heating and suction split
10s / 100°C heat-up and steam output
1600ml / 950ml clean and sewage tanks
1.8m / 4m hose and power cord reach
Three Steps in the Cleaning Flow
Use the sequence first. Buyers usually decide faster once spray, scrubbing, and suction are separated into visible roles.
Scrubbing
Uses the brush set to loosen the surface film on sofas, mattresses, and other upholstered jobs.
Suction
Pulls dirty water back out with the 15Kpa vacuum path, which helps the machine finish the pass cleanly.
Output choice matters too: 100°C steam and 60°C hot water give buyers two ways to match the same platform to different stain jobs.
Surface Fit and Workload Map
These surfaces fit the hose, tank split, and brush set especially well. The goal is to judge the right jobs, not every possible surface.
Sofas
The hose and brush set make couch cushions and armrests easier to reach without moving the whole seat.
Mattresses
Spray, scrubbing, and suction give a clearer path for stain spots that sit on fabric surfaces.
Car interiors
The 1.8m hose and 4m cord support seat, floor, and interior fabric work where reach matters.
Carpet spots
Dual tanks and suction split the clean-water and waste-water paths, which suits spot treatment jobs.
Core Specifications
A short spec table is easier to scan than a long paragraph when buyers want power, capacity, and reach in one look.
A second angle helps buyers judge the tank split and accessory layout more clearly.
| Product | Carpet Spot Cleaner Machine IK-DY506H OEM Supply |
|---|---|
| Output system | 3-in-1 spray, scrubbing, and suction |
| Heating and suction | 1200W heating + 500W suction |
| Heat-up and temperature | 10s heat-up, up to 60°C hot water and 100°C steam |
| Vacuum and tanks | 15Kpa vacuum, 1600ml clean tank, 950ml sewage tank |
| Reach and accessories | 1.8m hose, 4m power cord, 4 brushes |
| Weight and voltage | 4.22kg, AC220-240V EU voltage |
| Protection | IPX4 waterproof for wet cleaning |
Other Models on the Same Site
These alternatives stay inside the same supplier family, so the comparison is about output style, voltage, and use pattern rather than a different category.
IK-DY507 Fast Heating Spot Cleaner
15Kpa suction, fast heating, dual tanks, and IPX4 protection for buyers who want a close cousin to the main machine.
View product
IK-DY988 Heated Spot Cleaner
Steam and hot-water output with 110-240V wide voltage for project teams that need a temperature-first comparison.
View product
IK-DY502 Cordless Handheld Spot Cleaner
Wet/dry cleaning with USB charge for lighter mobile work and vehicle interiors.
View productRelated Reading
Three articles are enough here. Each one helps buyers judge fit, workflow, or output choice without adding filler links.
Sofa, mattress, and car fabric fit
Use this read when the question is where the machine fits best, not which headline spec sounds strongest.
Open article
Why spray, scrub, and suction need each other
Use this read when the workflow matters more than a single power number.
Open article
Hot water versus steam output
Use this read when temperature choice changes the buying conversation.
Open articleFAQ
Exactly six questions, all visible, all tied to the same machine and the same buying path.
What does the 3-in-1 flow do on this machine?
It combines spray, scrubbing, and suction so the stain can be wet, loosened, and pulled away in one workflow.
Which surfaces fit best?
It suits sofas, mattresses, car interiors, carpets, and other fabric stain jobs.
How do steam and hot water differ here?
This model offers up to 100°C steam and 60°C hot water, so buyers can match the output to the job.
How big are the tanks?
The machine uses a 1600ml clean tank and a 950ml sewage tank.
What power and reach does it offer?
It delivers 1200W heating, 500W suction, a 1.8m hose, and a 4m power cord.
Is it suited to OEM and wholesale buyers?
Yes. OEM and wholesale supply suit this model, and the contact path is the right place for project details and ordering questions.
